Peer-Reviewed Journal Articles

  • Belay Eshetu, and Solomon Seid, (2023). Modeling and Design of ANFIS Dynamic Sliding Mode Controller for a Knee Orthosis of Hemiplegia. Applied Bionics and Biomechanics. https://doi.org/10.1155/2023/9953957
  • Tamiru, T., Seid, S., Bogale, D. et al. (2023). Damage Modeling and Failure Analysis of Glass Fiber-Reinforced Composite Cylindrical Laminates Using Continuum Damage Mechanics. J Fail. Anal. and Preven. https://doi.org/10.1007/s11668-023-01689-6
  • Ketemaw and Seid S (2022). Design of A Rollover Index-Based Sliding Mode Controller For Roll Stability Of Three Wheeled Vehicles Using Rear Differential Braking, Front. Mech. Eng.Sec. Engine and Automotive Engineering. https://doi.org/10.3389/fmech.2022.1038289
  • Assfaw D and Seid S (2022). Design of a Super Twisting Sliding Mode Controller for an MR Damper-Based Semi-Active Prosthetic Knee. Front. Robot. AI 9:870018. https://doi.org/10.3389/frobt.2022.870018
  • Solomon Seid (2022). Optimal design of a magnetorheological (MR) damper using finite element method and response surface method. Journal of Defence Technology, ISSN2312-086X, 12(1), 1- 10.
  • Solomon Seid, C. Sujatha, and S. Sujatha (2019). Design and Evaluation of a Magnetorheological Damper Based Prosthetic Knee, International Journal of Engineering(IJE)-TransactionsA:Basics,32(1),146-152. https://www.ije.ir/article_82343.html
  • Solomon Seid, C. Sujatha, and S. Sujatha (2018). Optimal design of an MR damper valve for prosthetic knee application, Journal of Mechanical Science and Technology (Springer), 32 (6), 2959-2965. https://doi.org/10.1007/s12206-018-0552-7
  • Solomon Seid, S. Sujatha, and C. Sujatha (2017). Performance Evaluation of MR Damper Valve Configurations Using Finite Element Method, International Journal of Engineering (IJE)-Transactions B: Applications, 30 (2), 303-310. https://www.ije.ir/article_72889.html
  • Solomon Seid, S. Sujatha, and C. Sujatha (2016). Design and evaluation of swing phase controllers for single-axis knee, International Journal Bioautomation, 20(3), 373-388. http://biomed.bas.bg/bioautomation/2016/vol_20.3/files/20.3_06.pdf
  • Hassen Nigatu, A.P. Singh, and Solomon Seid (2012). Acceleration Analysis of 3DOF Parallel Manipulators. Global Journal of Researches in Engineering: Mechanical & Mechanics Engineering, 12(7), 31-41. https://engineeringresearch.org/index.php/GJRE/article/view/689
  • Saba G/Gergs G/Yesus, A.P. Singh, Guteta Kabeta Woyessa, and Solomon Seid (2012). Ergonomics Assessment of Passenger Seats of Mini-Buses in Ethiopia. Global Journal of Researches in Engineering: Industrial Engineering, 12(3), 1-7. https://globaljournals.org/item/1227-ergonomics-assessment-of-passenger-seats-of-mini-buses-in-ethiopia
  • Aliyi Umer Ibrahim and Bejai Naiker Nerash, (2023). Design modification of wheat and barley threshing machine. ARPN Journal of Engineering and Applied Sciences, https://doi.org/10.59018/012322
  • Aliyi Umer Ibrahim and Bejai Naiker Nerash, (2023). Design and fatigue analysis of drive shaft by using Finite Element method and CATIA software. ARPN Journal of Engineering and Applied Sciences, https://doi.org/10.59018/022333

Referred Proceedings

International Conferences

  • Solomon Seid and C. Sujatha (2019). Design Outlook of a Magnetorheological (MR) Damper for Prosthetic Knee Use. Proceedings of ISERD – 511th International Conference on Vehicular, Mobile and Wearable Technology (ICVMWT), Toronto, Canada.
  • Solomon Seid, C. Sujatha, and S. Sujatha (2018). Design evaluation of a mono-tube magnetorheological (MR) Damper Valve. Proceedings of 3rd International Conference on Innovative Design and Development Practices in Aerospace and Automotive Engineering (I-DAD) (Springer), Chennai, India. (Book Chapter: Published in Lecture Notes in Mechanical Engineering. Springer, Singapore) https://doi.org/10.1007/978-981-13-2718-6_15
  • Solomon Seid, C. Sujatha, and S. Sujatha (2018). MR damper based prosthetic knee design. Proceedings of CDAMIES International Conference (IOP), Tiruchirappalli, India, 139-142.
  • Solomon Seid, S. Sujatha, and C. Sujatha (2015). Design of controller for single-axis knee using MR damper. Proceedings of ECCOMAS Thematic International Conference on Multibody Dynamics, Spain, Barcelona, 989-998.
  • Solomon Seid, S. Sujatha, and C. Sujatha (2015). Design of controller for single-axis knee using hydraulic damper. Proceedings of IEEE AFRICON 2015 International Conference, Addis Ababa, Ethiopia, 467-671. https://ieeexplore.ieee.org/document/7331868
  • Ramaprasad, H., Solomon Seid, Allene Endayilalu (2013). Study on Investment casting process indigenization using local blend of wax and sand slurry for new product development. Proceedings of ICST-2013, Bahir Dar, Ethiopia, 154-161.
  • Aliyi Umer, Dereje Engida, G.M. Sayeed Ahmed and U Pranavi, (2022). Evaluation of T-72 tank driver seat based on anthropometric dimensions of Ethiopian military tank drivers. American Institute of Physics Conference Proceedings, Vol. 2648, No. 5, pp. 030002-1 – 030002-7 DOI: https://doi.org/10.1063/5.0128524
  • Aliyi Umer (2016). Fatigue and fracture analysis of the crack propagation on the breech block in artillery Rheinmetal 120 mm gun. 4th International conference on mechanical and Industrial Engineering MIE’2016 Proceeding Organized by Dar es Salaam University, Arusha Tanzania, Proceeding.
  • Aliyi Umer (2019). Design and Analysis of Mixed Shaft.1st International Conference on Recent Trends in Engineering and Technology and the Quest for Sustainable Development organized by Institute of Technology ,Ambo University ,Proceeding.
  • Aliyi Umer (2017). Fatigue and fracture analysis of the crack propagation on the breech block in artillery Rheinmetal 130 mm gun.1st International conference on Creating and Enabling Future through Science, Technology and Innovation: Dynamics and challenges for development endeavors Organized by Wollega University, Proceeding.